Pool Chemicals / Spa Chemicals    Pool Parts / Spa Parts    Pool Supplies    Spa Supplies    Winter Products

 Free Delivery  & *No Sales Tax - Just a Flat Rate $8.95 per order Charge - Click Here for Details
(*except NY residents)

Water Balancers

pH INCREASER

•  Raises pH levels to the ideal range of 7.2 to 7.6 ppm

•  Slows the rapid loss of chlorine caused by low pH

•  Slows chlorine dissipation, so your pool uses less chlorine

•  Stops eye irritation, etching and corrosion caused by low pH

•  Contains sodium carbonate “soda ash”

•  Recommended dosage: 1 lb. per 10,000 gallons.

It is important to keep your pool water in balance to get the most effective use of your chemicals. Test daily to ensure that pH, total alkalinity, calcium hardness and cyanuric acid (stabilizer) are within the correct levels.

pH is the most important factor in controlling you pool water balance.  High pH results in cloudy water, staining, scale, and filtration problems.  Low pH leads to corrosion of metal pipes, etched plaster, rapid loss of chlorine, and irritation to swimmers.

Alkalinity levels must be kept in check in order to control your pH levels.  It is impossible to keep pH in the proper range if alkalinity is not within the desired range.  Also, when total alkalinity drops below 80 ppm, equipment corrosion, plaster, etching and eye irritation can occur.

Calcium hardness is an integral component of water chemistry.  Soft fill water can cause low hardness levels, which leads to the corrosion of pool surfaces and fixtures.

Go To Chemical Index